Product bundle

Complete 10-lane scoring system for 100-200-300m/yd range

Highest quality scoring at 100, 200 or 300m/yds shooting distances. Intended for roofed firing lines. Targets applied 4/2-sensor closed chamber technology. These targets can withstand any weather! Never experience problems with acoustic interference from neighboring targets. No calibration needed. This system handles any situation and environment, always maintaining world leading accuracy with a minimum of maintenance!
Price from $Contact your local dealer for price
h3a electronic targets with monitors

Package specifications

H3A electronic target

10 electronic targets (Model H3A – 130cm/4ft wide), including following consumables:

  • Temperature shields at both sides.
  • Template with 6.35’’, 13’’ or 19’’ Other templates may be supplied on request.
  • Rubber band and expanded plastic sheets for easy maintenance and optimal accuracy
Firing line monitor - NSM2

10 NSM monitors with 10.4’’ display for each lane

  • Intended for roofed firing lines. Outdoor monitors can be supplied on request.
  • Fitted with smart-card reader
  • Fitted with movable floor stand. Wall- or table-top stands can be supplied on request.
Live view online spectator webpage

Spectator view internet

  • First year free connection
  • Spectator view on web (http://live.kongsberg-ts.no/).
WinGPS and pegasus software, range control and spectator software

Control room software and local spectator viewing

  • Control room software (Pegasus)
  • Local spectator viewing software (WinGPS).
Electronic target server

Signal Distribution Unit (SDU-3) at firing line.

  • Interconnection unit for targets, monitors and control room computer.
Outdoor Target power

Mains power supply at firing line and target line.

cable Communication between firing line and target line

Cables and junction boxes on firing line and target line

  • Monitor cables
  • Target cables

Add-ons and options

Our systems can be tailor made to fit any requirements. If you have specific needs that are not included in our package bundles, please contact us for a quote made especially for your range. 

  • The target is tested and proved with following calibers: .22LR, .223, 6.5x55 and .308. Similar calibers should work perfectly, but .22LR should be regarded as the lowest bullet energy possible and should only be used at 100m/yds.
  • Enclosed cables require targets to be mounted with a maximum center-center distance of 2m/yds. Other cable lengths can be provided at an additional cost.
  • Power supply at target line must be mounted with a maximum distance of 5m/yds from first target in line and must be protected against rain. Other cable lengths can be provided at an additional cost. This power supply require 120W (110-240VAC).
  • Power supply at firing line require maximum 240W (110-240VAC). Enclosed cables require it to be mounted with a maximum distance of 15m/yds from any monitor (preferably at same place as the SDU-3 and the control room computer).
  • The lower part (50cm / 20inches) of the targets should be protected against stray bullets by a berm or knee wall. This will protect target electronics and lower sensors. Upper sensors (3 pcs) are exposed to stray bullets (to gain optimal scoring accuracy of the target), but the target is made easy to repair. Similar targets with no upper sensors may be provided on request.
  • The targets require maintenance. Maintenance frequency may wary by shooter skills, shooting distances and calibers in use. An estimate would be every 500 shot at 100m/yds, 1600 shots at 200m/yds or 3000 shots at 300m/yds.
  • This package does not include computer(s) or screens to run control room software, spectator viewing or local network (LAN) to interconnect potential computers.
  • Shooting range infrastructure like target base, target stands, knee walls, bullet catchers, roofed firing line etc.
  • Installation. System can be installed by customer in a few hours.
  • All of the above can be provided with an additional cost. Contact our sales team or fill out the form at the bottom of this page for a quote specifically tailor made for your requirements

  • Shipping is not included. To get an estimate, contact our sales department
  • Enclosed cables require targets to be mounted with a maximum center-center distance of 2m/yds. Other cable lengths can be provided at an additional cost.
  • Power supply at target line must be mounted with a maximum distance of 5m/yds from first target in line and must be protected against rain. Other cable lengths can be provided at an additional cost. This power supply require 120W (110-240VAC).
  • Power supply at firing line require maximum 240W (110-240VAC). Enclosed cables require it to be mounted with a maximum distance of 15m/yds from any monitor (preferably at same place as the SDU-3 and the control room computer).
  • The lower part (50cm / 20inches) of the targets should be protected against stray bullets by a berm or knee wall. This will protect target electronics and lower sensors. Upper sensors (3 pcs) are exposed to stray bullets (to gain optimal scoring accuracy of the target), but the target is made easy to repair. Similar targets with no upper sensors may be provided on request.
  • The targets require maintenance. Maintenance frequency may wary by shooter skills, shooting distances and calibers in use. An estimate would be every 500 shot at 100m/yds, 1600 shots at 200m/yds or 3000 shots at 300m/yds.

Do you need help switching to a ELECTRONIC target system?

Fill out this form, or contact your local Kongsberg Target Systems agent here.

Kongsberg Target Systems Heistadmoen Industripark
N-3608 Heistadmoen
KONGSBERG
Norway

Telephone: +47 32 76 30 00
Mail: sales@kongsberg-ts.no

© 2021 Kongsberg Target Systems
Design and development by Godt Sagt